Are you experiencing poor WiFi signal even if your home is equipped with a high-quality network system? If your home is connected to high-speed internet, but some places are far from getting internet access, then you should do something about it.If you don't get any signal at all or get very little signal, this is article is right for you. What can be done to eliminate these WiFi dead zones in your home? The answer to this question is right here. Without any further delay, we get to the answer straight away. Get a Wavlink WiFi extender setup done. Yes, the easiest way to prevent a weak signal issue in some parts of your home is to use theWiFi range extenders. They expand the existing router signal to reach the dead spots in your home. To begin accessing t network, you first need to set it up with your router.
How Do I Set Up a Wavlink Range Extender?
Set up means to connect it to the host router, such that it can amplify the signal by receiving it from the router.You can set up your Wavlink wireless range extender by using any of the below mentioned techniques.
Wavlink Range Extender Setup via Web Based GUI
This method talks about how to set up a Wavlink WiFi range extender manually. Here, using your computer or laptop, wifi wavlinkcom setup page is accessed to get the setup done.To learn about the complete process, keep reading.
1. Take your new Wavlink WiFi range extender out of the box.Any user instructions, cables, accessories that you find in the package should be kept close to hand.
2. Next, plug the Wavlink range extender into the wall outlet to turn it on. After the LED lights have stabilised, go to the next step.
3. Using an Ethernet cable connect the Wavlink range extender to the router.
Make sure the Ethernet cable is in excellent state and that the connections between the devices are finger-tight.
4. Now, grab a desktop or laptop computer. It is preferable to have an updated operating system on the computer.
5. Open your preferred web browser. Select a browser that is using the most recent version of its software.
6. Type wifi.wavlink.com into the address bar and press Enter.
7. Username and password entry will be required. Use the Wavlink extender's default login information.
8. Click on Login.
9. The Wavlink setup wizard will be displayed.
10. At this point, just keep following the guidelines that are visible on the screen.
The wifi.wavlink.com setup manual process gets completed.
Wavlink Extender Setup Using IP Address
If for some reason, you are unable to execute the Wavlink range extender setup process manually using the web address, you have another option. Put to use the default IP address.
To get the IP address setup process done, follow the steps listed below.
1. Follow the steps 1 to 5 from the previous method.
2. Enter 192.168.1.1 in the address bar Be vigilant while entering the IP address as even a small error could lead you to another website.
3. Pressing Enter will bring up the Wavlink extender login page.
4. Enter the default login information. Avoid making any typing mistakes while entering the login and password into the appropriate areas.
5. Click on the Login button.
6. You'll land to the Wavlink range extender setup page.
7. Just adhere to the on-screen prompts to conclude the setup process.
There is another method that simplifies setting up a Wavlink range extender. Here it is:
Wavlink Extender Setup via WPS Method
1. The WPS button should be anywhere on your Wavlink extender.
2. Press it for a few seconds.
3. Find and push the WPS button on the router now.
This concludes the setup of the WavlinkWiFi range extender.
Final Words
We have finished writing about the Wavlink setup using various methods. Once the configuration is complete, try accessing your Wavlink extender network on various devices. We hope you can now simply access your Wavlink WiFi range extender.
