Easy Methods to Fix Linksys Velop Red Light Issue

90 percent of Linksys Velop users across the world are giving very good reviews on the internet. Seeing the reviews, many more users have switched to Linksys Velop. But, nowadays, all of them are cursing their fate when they come across “Linksys Velop red light” issue. Well, this can be due to heavy traffic on the internet, as you know Christmas is passed, still New Year is around the corner.

But, you don’t have to worry because we have come up with this post. Here, you will get to know some easy yet effective troubleshooting hacks following which fixing “Linksys Velop red light” issue will surely be a five-finger exercise for you, really. So, without much delay, stick to this 7-minute read and get fix for the issue instantly.

Fixed: Linksys Velop Red Light Issue

First, Check the Ethernet Connection

Bear in mind, use of a damaged Ethernet cable that is connecting your Linksys Velop router and your existing modem, will surely give you “Linksys Velop red light” issue. So, to effectively deal with the issue, we recommend that you replace the damaged Ethernet cable with a new one. What? Are you a lazy bud who doesn’t want to go out in the market for a new cable? Yes? Don’t be! It’s Christmas time! Go and enjoy Christmas trees, jingle bells, lights hanging around.

Still, don’t have any plans to go out? Ah! In that case, we suggest you connect them wirelessly. Will that be ok? But, ensure that you are connected to your own network, instead of using a public hotspots offered by Santa, namely your neighbors.

Is the “Linksys Velop red light” issue fixed? If your answer is not, don’t just stop reading this post. Don’t worry! You are going to have an instant fix shortly.

You Have to Place the Devices Closer

It is important to keep your Linksys Velop router, node, and modem in the same room. We really hope that you are aware of this fact. But, if you are getting “Linksys Velop red light” issue, it means that you have kept your devices at a distance, aren’t you. If yes, then you come to know, where you are mistaken, right? Don’t worry! To rectify your mistake, unplug your devices and place in an area in your home where you can easily place them in close proximity.

Once you are done doing this, you won’t get “Linksys Velop red light” issue again.

Your Devices Aren’t Connected

Another reason behind getting “Linksys Velop red light” issue is the partial or improper connection between Linksys Velop router and modem.

Therefore, check if the WPS button has been pressed on your Linksys Velop. If not, you need to press the WPS button on your Velop and then on your modem. Now, check if your devices are proper connected by accessing Linksys router login page.

Still the same issue is bothering you? If you nod in yes, don’t do the mistake of putting a full stop to this 7-minute read.

Update Linksys Velop Firmware

You might be thinking that an outdated firmware version on Linksys Velop is a primary reason, right? But, let us tell you, it is one of the biggest causes behind getting “Linksys Velop red light” issue. So, if you haven’t update Linksys Velop’s firmware yet, do it now. Trust us and mark our words, an updated firmware on your Linksys Velop will surely help you to make the most out of it.

Restart Your Velop

If you are on this point, it means that “Linksys Velop red light” issue hasn’t resolved yet. But, don’t worry! The post is still left. The issue might continue to trouble you because of technical glitches. To get rid of them, just restart your Linksys Velop router.

Don’t know about the process? Don’t worry! We will surely help you. Follow the instructions provided below and know how to restart your Linksys Velop in a flash:

• So, have you connected your client devices, modem to the Linksys Velop’s WiFi network? If yes, then consider disconnecting them for a short while.
• Thereafter, unplug your Linksys Velop, wait for a couple of seconds, and then, do the needful by plugging it back in again.
• The LED on your Linksys Velop will start blinking blue.
• Until you reach this point, the “Linksys Velop red light” issue will be resolved already.
• Now, you can reconnect your disconnected devices.

In a Nutshell

If you want to get rid of “Linksys Velop red light” issue, adapt the fixes provided in this article. Now, we are putting this 7-minute read to an end with this hope that the issue you are facing is resolved.