Being outperforming networking gadgets, Wavlink extenders have become a household name. However, outperforming never means that the device can’t fall victim to issues. There are certain issues that can take away your peace. One such issue is Wavlink extender WiFi not working. Are you struggling with this specific issue lately?
If you’ve nodded in yes, then walk through this post and learn how to get your Wavlink WiFi extender back on track in order to enjoy unlimited internet access again.
Fixed: Wavlink Extender WiFi Not Working
Give a Fresh Start
If you’ve done Wavlink setup, then rebooting the extender should be your habit. Do you know why? This is because it keeps technical glitches at bay thereby preventing the Wavlink repeater from multiple issues. But, it seems that you didn’t follow the rule of rebooting due to which you are facing trouble right now.
So, without any delay, consider giving a reboot to your Wavlink range extender. For this, you have to remove it from its respective wall socket, wait for a short span, and connect it back to the outlet. Once you are done rebooting, see to it whether the WiFi of your Wavlink extender has started working or not. If not, then worry not, we’ve 4 more hacks left in this troubleshooting guide.
Check the Power Socket
At times the Wavlink extender WiFi not working issue arises when the device is not fetching the adequate amount of electricity from the power outlet. Although it’s a distant reason behind the issue you are facing, still it can’t be ignored. The inadequate power supply can be an outcome of any one of the two reasons – a damaged power socket or excessive power outages in the area.
If the power socket is damaged, consider repairing it. In case you don’t have time to get it repaired, install your Wavlink extender into another power socket. Always use a UPS in case your area suffers frequent power cuts.
Change the Extender’s Location
Did you change the location of your extender after completing the Wavlink repeater setup process? Yes? But, did you place it correctly? Chances are that you placed it in an area filled with WiFi interference. Know that any area that consists of objects or devices that tend to interrupt or deviate the wireless signals emanated by your range extender can be regarded as a WiFi interference zone.
To your knowledge, some examples of WiFi interference creating objects or devices are mirrors, televisions, fish tanks, refrigerators, metal studs, aluminum doors, microwave ovens, treadmills, smart cameras, baby monitors, Bluetooth speakers, etc. Besides, your Wavlink extender must not be placed in corners or adjacent to a thick concrete wall.
Check the Ethernet Cable
Are you sure that the Ethernet cable holding the extender-router connection is working all well? Don’t know? Why don’t you check it? Look whether the Ethernet cable has deeper cuts or is stranded from any point. If yes, then know that the time to bring a new Ethernet cable to the house has come.
However, after replacing the Ethernet cable, you need to ensure that the wired connection is finger-tight. Otherwise, you’ll keep struggling with the problem. It would be a great idea if you consider buying an Ethernet cable with a higher data transmission rate.
Bring Your Devices Closer
Are your WiFi devices placed too far from each other? If yes, then it’s no wonder that the Wavlink extender WiFi not working issue has knocked on your door. Know that when your devices are placed too far then they won’t be able to transmit wireless signals properly.
Therefore, aim to create a safe distance between your Wavlink wireless extender and the main router. By safe distance, we mean that you can neither place your WiFi devices neck to neck nor at too much distance from each other. The reason is that too less distance can result in a clash of WiFi signals thereby creating Wavlink login issues.
Sum Up
That’s all about what to do if your Wavlink extender WiFi stops working. We hope that these steps will help you regain access to a high-speed WiFi connection. In case you are still struggling to get your Wavlink extender WiFi back on track, it is recommended that you take your device back to the factory default mode.
To reset your extender, you have to carefully push the Reset button on it. Thereafter, access ap.setup to set it up again. This time your extender will surely return to its normal working state.
